Each full 360° support has both an upper and lower 180° half-saddle manufactured to O.D. of pipe with welded stem for added strength.
Width is determined by saddle diameter.
Saddle widths are manufactured in 4”, 6” or 8”.
Metal thickness varies from .1345” to .5” depending on live loads.
Saddles connected with Grade 5 zinc plated nuts and bolts.
Provided suspension channel allows for quick installation.
Suspension channel is held in place with two (2) 9” earth anchors.
Saddles suspended by ½” threaded rods cut to length.
Suspended height is adjustable.
Each upper and lower saddle lined with .0625” rubber type abrasion shield.
Nuts and bolts provided.