Below Grade Side by Side Anchor Support
Product No. 300-SA


SKU: 300-SA Category:


Each full 360° support has both an upper and lower 180° half-saddle manufactured to O.D. of pipe with welded stem for added strength.
Width is determined by saddle diameter.
Saddle widths are manufactured in 4”, 6” or 8”. Metal thickness varies from .1345” to .5” depending on loads.
Saddles connected with Grade 5 zinc plated nuts and bolts.
Provided alignment plate allows for quick installation guiding installation of 18” or 26” earth anchors.
Saddles are supported on ¾” threaded rods cut to length.
Support height is easily adjustable.
Upper and lower supports are lined with .0625” rubber type abrasion shield.
Nuts and bolts provided.

Back to top

Comments are closed.