Below Grade Anchor Support
Product No. 300-A


SKU: 300-A Category:


Full 360° support includes an upper and lower 180° half-saddle manufactured to O.D. of pipe with welded stem for added strength.
Width is determined by saddle diameter.
Saddle widths are manufactured in 4”, 6” or 8”. Metal thickness varies from .1345” to .5” depending on load.
Saddles are connected with Grade 5 zinc plated nuts and bolts.
Provided alignment plate allows for quick installation guiding installation of 18” or 26” earth anchors.
Saddle is supported on ¾” threaded rods provided and cut to length.
Support height is adjustable + or – 3.0”.
Upper and lower support lined with .0625” rubber type abrasion shield.
Nuts and bolts provided.

Back to top

Comments are closed.