Full 360° support has both an upper and lower 180° half-saddle manufactured to O.D. of pipe with welded stem for added strength.
Saddle widths are manufactured in 4”, 6” or 8”.
Support width is determined by diameter of saddle.
Saddle steel thickness varies from .1345” to .5” depending on loads.
Stem has 9/16” holes evenly spaced to accommodate other MSS accessories.
Saddles connected with Grade 5 zinc plated nuts and bolts.
Easily adjusted up or down in increments of .75”.
Upper and lower saddle lined with .0625” rubber type abrasion shield.
Schedule 40 nominal 2” or 3” diameter mild steel legs cut to size with welded base plate to accommodate roof curbs.
Each leg has four (4) seismic brace points of connection at top.
Nuts and bolts provided.