gradeandfloorequipmentsupport

STRAIGHT EQUIPMENT SUPPORT FOR ROOF OR GRADE MOUNT

Description:  Horizontal straight equipment supports with welded stem for added strength. Quantity, support width and material thickness determined by equipment  size (LxWxH) and weight.  Widths manufactured in 4”, 6”, or 8”.   Support material thickness varies from .250” to .750”.  Angle clips designed to retain equipment in place included.  Horizontal straight support connected with Grade 5 zinc plated nuts and bolts.  Easily adjust up or down in increments of .75”.  Support lined with .0625” rubber type shield to reduce abrasion and vibration transmission.  Schedule 40 nominal 2” or 3” diameter mild steel legs cut to size. Standard Grade mount base plate is 6” x 6”. Standard Roof mount base plate is 6” x 3.5”.  Other custom sizes available.  Each leg has four (4) seismic brace points of connection at the top.  Nuts and bolts provided.

Options:  Seismic bracing
Available in:  ASTM A36  MIld Steel, ASTM A653 G90 Steel Sheet Zinc Coated (galvanized), ASTM A480 Stainless Steel Plate and ASTM B209-10 Aluminum Plate, Powder Coated

Product No. 101E-R Roof Mount Equipment Support
Product No. 101E-G Grade Mount Equipment Support

suspendedequipmentsupport

ROUND SUSPENDED EQUIPMENT SUPPORT

Description:  Full 360° support has both an upper and lower 180° half-saddle manufactured to O.D. of Tank, Vessel or other cylinder type equipment with welded stem for added strength. Quantity, support width and material thickness determined by equipment size or diameter and weight.  Saddle widths are manufactured in 4”, 6” or 8”.  Saddle material thickness varies from .250” to .75”.  Stem has 9/16” holes evenly spaced to accommodate other MSS accessories. Saddles connected with Grade 5 zinc plated nuts and bolts.  Order Product No. 200E-SI if isolation springs are required.  Height easily adjusted up or down.  Upper and lower support is lined with .0625” rubber type shield to reduce abrasion and vibration transmission.  Suspended using ½”-16 threaded rod cut to length.  Nuts and bolts provided.

Options:  Seismic bracing (Product No. 200E-S)
Available in:  ASTM A36  MIld Steel, ASTM A653 G90 Steel Sheet Zinc Coated (galvanized), ASTM A480 Stainless Steel Plate and ASTM B209-10 Aluminum Plate, Powder Coated

Product No. 100E-S Round Suspended Equipment Support
Product No. 200E-SI Round Suspended Equipment Support with Isolation

suspendedequipmentsupport-straight

STRAIGHT SUSPENDED EQUIPMENT SUPPORT

Description:  Horizontal straight support with welded stem for added strength.  Quantity, support width and material thickness determined by equipment size (LxWxH) and weight. Widths are manufactured in 4”, 6” or 8”.  Support material thickness varies from .250” to .75”.  Comes with angle clips designed to retain the equipment in place.  Stem has 9/16” holes evenly spaced to accommodate other MSS accessories.  Angle clips designed to retain  equipment in place included.  Horizontal straight support is connected with Grade 5 zinc plated nuts and bolts.  Order Product No. 201E-SI if isolation springs are required. Connector plates manufactured to accept diagonal, longitudinal and transverse seismic bracing.  Suspended using threaded rod cut to length. Nuts and bolts provided.

Available in:  ASTM A36  MIld Steel, ASTM A653 G90 Steel Sheet Zinc Coated (galvanized), ASTM A480 Stainless Steel Plate and ASTM B209-10 Aluminum Plate, Powder Coated

Options:  Seismic bracing (Product No. 101E-S)

Product No. 101E-S Straight Suspended Equipment Support
Product No. 201E-SI Straight Suspended Equipment Support with Isolation